Auger Flighting
How To Measure Flighting
O.D. (Outside Diameter)- Measure from the top of your flight to the bottom along side the shaft. Should be 3/4″ to 1″ less than the tube it is going in.
Pitch: The Distance from one flight to the next measured parallel to the shaft.
Right|Left Hand: if screwing into the wall like a wood screw, which direction would you turn it?
I.D.(Inside Diameter): is the hole in the middle of the flighting into which the center shaft inserts.
Thickness: Thickness is measured at the base, where the Flighting is welded onto the center shaft.

Sectional Flighting
Sectional pitch is measured end to end. When replacing flighting, please note all differences between top and bottom augers.
OD x Pitch x Hand x ID x Gauge – Price Each
8 x 8 L x 1-1/4 x 1/4
8 x 8 R x 2-1/2 x 1/4
9 x 9 R x 2-1/2 x 1/4
10 x 7 L x 1-7/8 x 1/4
10 x 9-1/2 R 2-1/2 x 1/4
11-1/2 x 13 R x 3 x 3/16
12 x 8-1/2 R x 3 x 1/4
9 x 9 R x 2-1/2 x 1/4
9.5 x 9.5 R x 2-1/2 x 1/4
10 x 9-1/2 R x 2-1/2 x 1/4
11-1/2 X 13 R X 3 X 3/16
13 x 9 L x 4-1/2 x 1/4
16 x 10-1/2 L x 4-1/2 x 1/4
17 x 17 R x 4-1/2 x 3/8
9 x 9 R x 2 x 1/4
9 x 9 R x 2-1/4 x 1/4
10 x 7 L X 1-7/8 X 1/4
10 X 9.5 R x 2-1/2 x 1/4
10-3/4 x 10-3/4 R x 2-1/2 x 1/4
12 x 9-1/2 L x 3 x 1/4
14.5 x 11.5 L x 4-1/2 x 3/16
Wear Shoes offer a quick fix to your worn auger flighting and increases the life of your auger. Each shoe is made of 3/8-inch plastic. Shoes have pre-drilled holes for easy installation. All that’s needed is to drill holes in your existing flighting, mount and screw on, capped screws, lock washers and lock nuts are provided.
Wear Shoes are measured by the Outside Diameter.
6, 7, 9, 11, 13, 15, 18, 20, 24
Helicoid Flighting
All standard pitch. Long and Short Pitch Flighting Available, Call for Pricing. Reflight quotes are Available upon Request.
2 x 3/16
2-1/2 x 3/16
3-inch OD
3 x 3/16
3-1/4 x 3/16
4-inch OD
4 x 3/16
4-1/4 x 3/16
4-1/2 x 3/16
5-inch OD
5 x 3/16
5 x 1/4
5-1/4 x 3/16
5-1/4x 1/4
5-1/2 x 3/16
5-1/2 x 1/4
6- inch OD
6 x 3/16
6 x 1/4
6-1/4 x 3/16
6-1/2 x 3/16
6-1/2 x 1/4
7-inch OD
7 x 3/16
7 x 1/4
7-1/4 x 3/16
7-1/4 x 1/4
7-1/2 x 3/16
7-1/2 x 1/4
8 x 3/16
8 x 1/4
8-1/2 x 3/16
9-inch OD
9 x 3/16
9 x 1/4
9 x 5/16
9 x 3/8
9-1/2 x 3/16
9-1/2 x 1/4
10-inch OD
10 x 3/16
10 x 1/4
13 x 1/4
11-inch OD
11 x 3/16
11 x 1/4
11 x 3/8
11-1/2 x 3/16
11-1/2 x 3/8
12-inch OD
12 x 1/4
12 x 3/8
13-inch OD
13 x 1/4
13 x 3/8
14 x 1/4
14 x 3/8
14 x 5/16
15-inch OD
15 x 1/4
15 x 5/16
15 x 3/8
16-inch OD
16 x 1/4
16 x 5/16
16 x 3/8
16 x 7/16
17-inch OD
17 x 3/8
18-1/2 inch OD
18 x 3/8
19-inch OD
19 x 3/8
20-1/2-inch OD
20-1/2 x 3/8
Brush Flighting
All brush flighting is RIGHT HAND ONLY. It’s mounted on the following Inside Diameter Tube. Brush flight can be custom made to order, listed items are in stock.
6 inch OD x 1-1/4 inch ID
7 inch OD x 1-1/4 inch ID
8 inch OD x 1-1/2 inch ID

Poly Cups Flighting
Poly Cup Flighting on galvanized or stainless hex tubes.
5-5/8 in OD, plain
6 in OD, cupped
7 in OD, cupped
9 in OD, plain and cupped
12 in OD is available and is a stock item
Super Edge and Max Edge Style Flights
Info coming soon!